andi
Logical AND immediate
Performs a logical AND of an immediate value and the second operand, storing the result in the second operand.
Used in
- Arithmetic, logic and bitsM68K assembly
- trap #15 and its tasksM68K assembly
- Multiply and divide, with the remainderM68K assembly
- Even or odd, count the set bits, multiply by shiftingM68K assembly
- A subroutine with its arguments in registersM68K assembly
- A jump tableM68K assembly
- Print a number in any base without helpM68K assembly
- A bouncing ballM68K assembly
- The snake gameM68K assembly
- Flappy birdM68K assembly
XNZVC –●●00
- ● set from the result
- 0 always 0
- – not changed
Forms
andi ,Size .b
Privileged
A 68000 runs these only in supervisor mode; s68k runs every program in supervisor mode, as EASy68K does, so they run here too.
andi ,Size .w
Operands
#imm- An immediate value written after
#: a number, character or label, such as#10,#$FFor#'a'. It must fit the operation’s size: byte-128to255, word-32768to65535, or long-2147483648to4294967295; signed and unsigned spellings are accepted. More <ea>- An operand using one of the instruction’s supported addressing modes, such as
d0,(a0)+or4(a1). It may name a register, memory or an immediate value. More ccr- The condition-code register: the low byte of
sr, containing theX,N,Z,VandCflags. More sr- The 16-bit status register. Its upper byte contains system flags; its lower byte contains the condition codes. More
move.l #$ABCD, d0
andi.w #$FF00, d0 ; keep high byte only: d0 = $AB00